PA3500

Related Products

• ADDED

  CDRE

  

  CDRE-Rectangular Cabinet Fan.

  features

  • Modular System: Casings can be disassembled, if required.
  • Easy to install.
  • Min. 25mm perforated panels manufactured from pre-galvanised mild steel with non-flammable mineral wool infill for thermal and acoustic insulation.
  • All units are fitted with fans from the Systemair range, with external rotor motors for the direct driven units.
  • Compact design
  • Low-level noise

  ---

  The Systemair Preformance Curves.

  Have been tested using duct test chamber in accordance with DIN 24153. The values refer to an air density of 1.2 kg/m3 at 200C.

  

  *Click the button if you wish to view/download the Technical Data.

• ADDED

  PA4200

  

  PA4200

  
   
  Stylish air curtain for commercial and industrial premises, with intelligent control.
  • Horizontal mounting
  – Recommended installation height 4,2 m* – Lengths: 1, 1,5, 2 and 2,5 m
  • Vertical mounting
  – Recommended installation width 6 m*
  (2 units), one on each side – Lengths: 1,5, 2 and 2,5 m
  • Ambient, no heat
  • Electrical heat: 8–20 kW
  • Water heat WH, WL, WLL

  

  Application

  With air curtain PA4200 there are more opportunities than ever before, packed into the same product. There are therefore many areas of use. PA4200 is specifically designed for doorways in for example, large commercial installations or industrial and warehouse buildings.
  The air curtain has many intelligent and energy saving features which provide fully automatic protection for the entrance, adaptable to each area of use.

  Design

  Through its timeless design and its many accessories, it's easy to get PA4200 to blend well into the premises. Front and service hatch can be finished in any colour to perfectly match the environment. The air curtain is available for horizontal, vertical and recessed installation.

  Product specifications

  • Prepared for the SIRe control system whose pre-programmed default settings and many features make it easy to install and use the air curtain. Read more about the SIRe controls package in the “Controls” section.
  • The front is easy to open and lock in the open position, which facilitates installation and allows easy maintenance.
  • The air curtain is complemented with a vertical kit for vertical installation.
  • Outlet extension for recessed installation is available as an accessory.
  • The accessory Design kit enables a neat installation with concealed mountings, pipes and cables.
  • Corrosion proof housing made of hot zinc-plate and powder enamelled steel panels. Colour front and service hatch: white, RAL 9016, NCS S 0500-N. Colour grille, rear section and ends: grey, RAL 7046.

  *Click the button if you wish to view/download the Technical Data.

• ADDED

  VF-BDT

  

  Tubular Ventilating Fan. (Ultra-thin Panel)

  Features

  • Made of high glossy ABS.
  • Centrifugal wheel.
  • Quiet operating.
  • Long life motor with ball bearings.

  *Click the button if you wish to view/download the Technical Data.

• ADDED

  PA2200C

  

  PA2200C

  
   
  Stylish air curtain for entrances, with remote and integrated control.
  • Recommended installation height 2,2 m*
  • Horizontal mounting
  • Lengths: 1, 1,5 and 2 m
  • Ambient, no heat
  • Electrical heat: 3–16 kW
  • Water heat

  

  Application

  The PA2200C is a compact air curtain, suitable for most small entrances. The air curtain has an integrated control system and can also be remotely controlled which makes it very easy to use.
  PA2200C creates a temperature dividing air barrier that effectively prevents cold draughts and gives excellent heating comfort inside the door.

  Design

  With its timeless design PA2200C is suitable for all entrances. The air curtain has a control panel discretely integrated in the end, which makes cable routing unnecessary. The front can be finished in any colour to perfectly match the environment.

  Product specifications

  • Remote control and integrated regulation.
  • 3 fan steps and 2 electrical heating steps.
  • Units with 3 kW are equipped with 1,5 m cable and plug.
  • Wall brackets included.
  • The front is easy to remove, which facilitates installation and allows easy maintenance.
  • Corrosion proof housing made of hot zinc-plate and powder enamelled steel panels. Colour front: white, RAL 9016,
  NCS S 0500-N. Colour grille, rear section, ends and brackets: grey, RAL 7046.

  *Click the button if you wish to view/download the Technical Data.