+63 2 921 8578 / 73
AGS6000
AGS6000
AGS 6000
Air curtain for doors in industrial and large premises, with intelligent control.
• Recommended installation height 6 m*
• Horizontal mounting
• Lengths: 1, 1,5, 2, 2,5 and 3 m
• Ambient, no heat
• Water heat WH, WL
Application
AGS6000 is a powerful air curtain intended for industrial doors but it can also be used for entryways in other large premises such as shopping malls.
With its many clever, energy saving functions, the air curtain gives effective protection, specially adapted for your door.
Design
AGS6000 has a timeless, clean design. The air curtain is intended for horizontal installation, models for vertical and recessed installation are available for special order.
Product specifications
• Prepared for the SIRe control system whose pre-programmed default settings and many features make it easy to install and use the air curtain. Read more about the SIRe controls package in the “Controls” section.
• The following models are available for special order: – with electrical heating
– with alternative water connections
– for vertical installation
– for recessed installation in suspended ceilings
• Intake grilles that can be opened make it easy to access the water coil. The grille is easy to clean from the outside.
• Adjustable outlet grille makes it possible to direct the air for optimum air curtain effect.
• Corrosion proof housing made of hot zinc-plate and powder enamelled steel panels. Colour: white, RAL 9016, NCS S 0500-N.Colour grille: grey, RAL 7046.
*Click the button if you wish to view/download the Technical Data.
Related Products
VF-APB
Exhaust Fan.
Features
• Exhaust louver type.
• The fan shall be suitable for wall mounting.
• Condenser motor with thermo cut-off.
• Well lubricated bearing for long life operation.
• Propeller fan incorporated with advance blade design enables powerful airflow at low noise.
• Automatic shutter.
• Orifice equipped with oil cup collects oil drops effectively.
• Front louver with blind shutter enhances privacy and safety protection.*Click the button if you wish to view/download the Technical Data.
Bifurcated Axial Fan AXCBF
Standard features
• Aerofoil impeller with adjustable pitch angle
• Die-cast aluminium hub and blades
• Bifurcated casing, hot dip galvanised steel to EN ISO1461
• Flanges to Eurovent 1⁄2
• Three phase motors, IP55, insulation class F, in accordance with EN60034-5IEC85, terminal box mounted directly onto the motor.
• Suitable for operating tempertures up to 200°C.The Systemair AXCBF range of bifurcated medium pressure axial fan has been developed for applications with an atmosphere which would either require special motors or reduce the lifetime of a standard motor. The motors of AXCBF are out of the airstream. Available in sizes from 315 up to 1250mm nominal diameter.
*Click the button if you wish to view/download the Technical Data.
PA4200
PA4200
Stylish air curtain for commercial and industrial premises, with intelligent control.
• Horizontal mounting
– Recommended installation height 4,2 m* – Lengths: 1, 1,5, 2 and 2,5 m
• Vertical mounting
– Recommended installation width 6 m*
(2 units), one on each side – Lengths: 1,5, 2 and 2,5 m
• Ambient, no heat
• Electrical heat: 8–20 kW
• Water heat WH, WL, WLL
Application
With air curtain PA4200 there are more opportunities than ever before, packed into the same product. There are therefore many areas of use. PA4200 is specifically designed for doorways in for example, large commercial installations or industrial and warehouse buildings.
The air curtain has many intelligent and energy saving features which provide fully automatic protection for the entrance, adaptable to each area of use.Design
Through its timeless design and its many accessories, it's easy to get PA4200 to blend well into the premises. Front and service hatch can be finished in any colour to perfectly match the environment. The air curtain is available for horizontal, vertical and recessed installation.
Product specifications
• Prepared for the SIRe control system whose pre-programmed default settings and many features make it easy to install and use the air curtain. Read more about the SIRe controls package in the “Controls” section.
• The front is easy to open and lock in the open position, which facilitates installation and allows easy maintenance.
• The air curtain is complemented with a vertical kit for vertical installation.
• Outlet extension for recessed installation is available as an accessory.
• The accessory Design kit enables a neat installation with concealed mountings, pipes and cables.
• Corrosion proof housing made of hot zinc-plate and powder enamelled steel panels. Colour front and service hatch: white, RAL 9016, NCS S 0500-N. Colour grille, rear section and ends: grey, RAL 7046.*Click the button if you wish to view/download the Technical Data.
Technology brought to you by: Fil-Chin Engineering Equipment Inc.
IT Business Solutions by BP Trade & Marketing