+63 2 921 8578 / 73
HK-1800SA
HK-1800SA
Features
- High Performance
- Maintenance Free
- Service Free
Technical Specifications
| Material | #304 Stainless Steel |
| Cover Finish | Satin Finished |
| Dimensions | 240 mm (W) x 216 mm (H) x 165 mm (D) [9-3/8" (W) x 8-1/2" (H) x 6-1/2" (D)] |
| Operation Voltage | 110 - 120Vac, 50 - 60Hz, 1.5 - 1.8 kW 220 - 240Vac, 50 - 60Hz, 1.5 - 1.8 kW |
| Warm Air Speed Output | 60Hz: 16.5 m/s ; 50Hz: 14.5 m/s |
| Dryer Shall Deliver | 60Hz: 291 m/h ( 171 CFM ); 50Hz: 255 m/h ( 150 CFM) |
| Motor Type | HK-1800PA, HK-1800PS: 80 W ; HK-1800EA, HK-1800SA, HK-1800SRA: 100W 60Hz: 3,250 R.P.M., 50Hz: 2,850 R.P.M ; brushless motor |
| Motor Thermal Protection | Auto Resetting thermostat turns unit off at 105°C (221°F) |
| Heater Thermal Protection | Auto resetting thermostat turn units off at 70°C(158°F); Thermal fuse cuts unit off at 141°C (286°F) |
| Drying Time | Approximately 30 -35 seconds |
| Sound Level | 55±3 dB @ 1 m |
| Timing Protection | 60 second auto shut off |
| Drip Proof | IPX1 |
| Isolation | Class 1 |
*Click the button if you wish to view/download the Brochure.
Related Products
Thermo fan Multibox/T
Thermo fan Multibox/T- High performance and extreme flexibility.
Standard features
Whenever higher requirements are needed, the new Multibox/T can play to its strength. For example, it can handle polluted and hot exhaust air up to 100 °C in industrial areas or kitchens. This new fan sets standards for flexibility and functionality. During product development, great attention was paid to a fast and flexible installation on site as well as easy maintenance. The results are impressive and will convince you as well as your customers:
• The exhaust direction can be modified on site by sim- ply changing the side panel positions. The location of the MUB/T can therefore be chosen freely and easily.
• The motor and impeller section can be removed as one section for maintenance. Practical handles allow an easy extraction.
• A condensate drain is pre-installed as standard.
• Short time of delivery: MUB/T is available from stock.Additional benefits of the MUB/T:
• Air volume optimized motor support
• High efficiency motors placed outside air flow, IE2 efficiency class for all 3~motors of 0.75 kW and higher
• Free-running, backward curved impeller ma- nufactured from aluminium
• Frame profile from corrosion-resistant aluminium and plastic corners
• Housing equipped with 20 mm mineral wool for optimal sound and heat insulation
• Extensive range of accessories suitable for circular and rectangular ducts
• Sizes from 400 to 630
• Air volume up to 15.000 m3/h*Click the button if you wish to view/download the Technical Data.
K SILEO Series
K 150 M Sileo
• Speed-controllable
• Quiet-running
• Increased efficiency
• Integral thermal contacts
• Can be installed in any position
• Can be installed outdoors
• Maintenance-free and reliableThe K Sileo series is designed for installation in ducts. All K-fans have a minimum 25 mm long spigot connections.
The fans have backward-curved blades and external rotor motors. To simplify the installation the K Sileo fan has a fixing bracket together with screws for mounting the bracket included as standard. The FK mounting clamp facilitates easy installation and removal, and prevents the transfer of vibration to the duct. The fans can be speed- controlled via a stepless thyristor or a 5-step transformer.
To protect the motor from overheating the fan has integral thermal contacts with manual reset.The casing is manufactured from galvanised sheet steel and folded which gives the fan a close to air tight casing. Duct connected outdoor and wet room applications of the fan are possible due to the air tight casing.
Download Technical parameters
Technology brought to you by: Fil-Chin Engineering Equipment Inc.
IT Business Solutions by BP Trade & Marketing